Clearance Specials
  • For dusty applications or when using metallic grit (maximum G-50) or shot (maximum S-170), reclaimers rated at 900 cfm are recommended.
  • CDC collectors are serviced from the top, requiring additional height allowance for replacing the filter cartridge.
  • For steel applications, flex hose, and adaptors must be sized appropriately. Optional rubber curtains recommended. See “M” models for steel-ready cabinets.
Unit of Measure

Specifications

Reclaim

N/A 600 CFM17 m³/m

Dust Collection

N/A RPC-2

Single Phase

N/A 19950

Three Phase

N/A 19952

Dust Collectors

N/A Reverse Pulse Collector:
Reverse pulse cartridge dust collectors (which trap 99.7% of dust down to 0.5 micron) allow non-stop, high-production blasting. The polyester-cellulose cartridges are automatically pulse cleaned for maximum filter efficiency. Worn cartridges can be replaced in minutes.

  • 235 sq. ft. filter area per cartridge
  • RPC-2 has two cartridges (470 sq. ft.)

  • Electrical

    N/A 600 CFM (17 m3/m) 1HP, 115V, 1PH, 60HZ, (.75KW, 220V, 1PH, 50HZ); available with either single phase or three phase motors.
    For three phase motors, specify 230v or 460v.
    Other motors and electrical configurations are available to make your system compatible with local power systems.